Ender Fast PLA 1Kg 1.75mm

Creality Ender Fast PLA Filament 1.75mm — High-Speed Printing with Exceptional Finish

Need a PLA filament that keeps up with your high-speed printer without sacrificing surface quality? The Creality Ender Fast PLA is purpose-built for speed, delivering stable extrusion at up to 300mm/s with excellent fluidity and a smooth, consistent finish on every print.

Engineered for Speed

Standard PLA filaments struggle when pushed past 100mm/s — you get under-extrusion, rough surfaces, and poor layer adhesion. The Ender Fast PLA solves this with a formulation optimised for rapid melting and flow. Whether you’re running a Creality K1C at full speed or pushing your Ender 3 V3 KE to its limits, this filament keeps up without clogging or stringing.

High Strength, Low Warping

Don’t let the speed fool you — the Ender Fast PLA produces parts with impressive rigidity and impact resistance. Its low-shrinkage formula means minimal warping even on larger prints, giving you dimensional accuracy you can rely on for functional parts, prototypes, and detailed models alike.

Smooth Surface, High Fidelity

Thanks to its excellent flow characteristics, the Ender Fast PLA delivers a naturally smooth surface with minimal layer lines visible. Fine details come through clearly, making it ideal for display pieces, architectural models, and anything where appearance matters as much as strength.

Eco-Friendly Paper-Wrapped Spools

The Ender Fast PLA ships on paper-wrapped spools — a sustainable alternative to traditional plastic spool construction. Same reliability, less waste.

Specifications

• Material: PLA (Polylactic Acid) — Fast formulation
• Diameter: 1.75mm (±0.03mm tolerance)
• Net Weight: 1KG per spool (also available in 2KG packs)
• Nozzle Temperature: 190–230°C (start at 210°C for high-speed)
• Bed Temperature: 60–80°C
• Print Speed: Up to 300mm/s
• Compatibility: Most 1.75mm FDM printers incl. Creality Ender, K1, K2 & CR series
• Brand: Creality (Ender series)
• Packaging: Vacuum-sealed, eco-friendly paper-wrapped spool

Printing Tips

• Start at 210°C nozzle temp for high-speed printing and adjust in 5°C increments based on results.
• Use a bed temperature of 60–70°C for most prints. Increase to 80°C for larger models or better first-layer adhesion.
• A PEI or textured build plate works best — no glue stick needed for most PLA prints.
• For maximum speed (300mm/s), ensure your printer supports input shaping to reduce ringing and ghosting.
• Store sealed with desiccant when not in use. If the filament has absorbed moisture, dry at 45–55°C for 4 hours before printing.